Specifications :-

Parallel Shank Drills are available in different dia right from 0.5mm till 25mm. There are different overall lengths and flute lengths available as per the requirement of the customer it is made of high speed steel.

Applications :-

Suitable for drilling general steel, alloy steel under HRC 35, iron,stainless steel.

Specifications :-

Taper Shank Drills diameter range right from 3mm to 102mm there are different overall lengths and flute lengths available as per the requirement of the customer it is made of high speed steel.

Applications :-

A taper shank drill (high-speed steel) is a cutting tool that is attached to a drill press, a milling machine, a lathe, etc. and used to drill holes. The base metal, high-speed steel is a material with metal components such as tungsten, molybdenum, and chrome added, and has excellent abrasion resistance and toughness.

Specifications :-

It is available in fine pitch and coarse pitch it is available in sets and also single pieces.

The cobalt percentages in the taps may differ depending on the hardness of the material.

Applications :-

HSS Straight Flute Taps are used to cut threads in blind or through holes in most materials. They are manufactured to ISO529 standard and are suitable for hand or machine cutting. This versatile set contains three taps:

- Taper Cut (First tap) - Used for through holes or as a starter tap.

- Second Tap (Plug) - To follow the taper when tapping blind holes.

- Bottom Tap (Bottom) - For threading to the bottom of a blind hole.

Specifications :-

The diameter ranges from 3mm to 76mm there are two variants i.e H7 and H8.

Applications :-

A reamer is a cylindrical or conical rotary cutting tool used to enlarge and finish holes to a precise measurement and finish. There are two types of reamers, hand and machine called chucking reamers. All reamers have either straight or helical flutes where chips, cooling and lubricating fluid pass through.

Specifications :-

Center drills come in two common types, type a (din 333-a) and type b (din 333-b), based on the center drill angle.

Applications :-

A center drill is used for drilling a hole on the axis of a shaft to hold it between centers. It is also used to drill center holes on machining centers.